boAt Airdopes 138 Manual | Step-by-step Earbuds Guide

The boAt Airdopes 138 earbuds come with specs such as Bluetooth 5.0 with about 10 meters of working connection range, a battery life of 3 hours on a single charge + 12 hours using the charging case, 13mm drivers and built-in microphones in each earbud, a Type-C port on the charging case, the IPX4 dust and sweat-proof certification, and much more. Learn how to use these earbuds using this boAt Airdopes 138 manual!

If you are interested in purchasing these earbuds, you can easily do it using the boAt official website. Also, in case you are interested in giving the original manual a look, you can do it here.

boAt Airdopes 138 Specs Sheet

Model	boAt Airdopes 138
Weight	Earbuds and charging case: Around 40 grams
Waterproof/IP ratings	IPX4
Bluetooth version	V5.0
Range/Distance	10 meters
Connectivity Port/Charging Cable	Type-C
Driver	13mm
Speaker frequency response	20Hz – 20kHz
Battery Life	Earbuds: Around 3 hours Charging case: Around 12 hours
Charging Time	Earbuds: Around 2 hours Charging case: Around 2.5 hours
App Support	No
Controls/Features	Play and pause a song, play the next and previous song, answer, end, and reject a call, voice assistant
Accessories	Charging case, USB cable, user manual, warranty card, catalogue, sticker
Price	Around 35 USD

boAt Airdopes 138 Accessories

The earbuds come with the following accessories:

• Charging case.
• USB cable.
• User manual.
• Warranty card.
• Catalogue.
• Sticker.

boAt Airdopes 138 Manual | Pairing & Charging

How To Wear These Earbuds?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How To Turn On And Off?

Turn On

Automatically: Open the lid of the charging case. After that, the earbuds will turn on automatically.

Manually: Press the multifunction touch button on both earbuds for 3 seconds. After that, a blue light will start flashing, and the earbuds will turn on.

Turn Off

Automatically: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

Manually: Press the multifunction touch button on both earbuds for 5 seconds. After that, the earbuds will turn off.

How To Pair The Earbuds? – Dual Mode

To Android And iOS Devices

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 138 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

To Windows (PC)

Step 1: Turn on the Window’s Bluetooth.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Click on Bluetooth.

Step 6: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 7: Select the Airdopes 138 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Pair The Earbuds? – Single Mode

Step 1: Open the lid of the charging case and take the selected earbud out. After that, it will turn on.

Step 2: Unlock the desired device.

Step 3: Go to the device’s settings.

Step 4: Turn on Bluetooth on the desired device.

Step 5: Search for a new device.

Step 6: Select the Airdopes 138 earbud. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

NOTE: To switch to Stereo mode, simply take out the other earbud from the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage.

How To Control These Earbuds?

NOTE: The multifunction touch button is placed on the top outside part of the body of the earbuds.

• Play or pause a song: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: While listening to music, press the multifunction touch button on the right earbud two times.
• Play the previous song: While listening to music, press the multifunction touch button on the left earbud two times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds one time.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

Volume cannot be controlled via earbuds and can only be adjusted using the connected phone/media device.

How To Reset And Re-Pair These Earbuds?

NOTE: To ensure a good result, make sure that the earbuds are fully charged.

Primary Method

Step 1: Go to the device’s settings.

Step 2: Delete the Airdopes 138 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the desired device.

Step 4: Place the earbuds into the case and close the lid.

Step 5: Open the lid of the case and take the earbuds out.

Step 6: Press the multifunction touch button on both earbuds three times. A red light will be on for 1 second.

This will reset the earbuds.

Step 7: Place the earbuds into the charging case and close its lid.

Step 8: Turn on Bluetooth on the desired device.

Step 9: Search for a new device.

Step 10: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 11: Select the Airdopes 138 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

Secondary Method

Step 1: Go to the device’s settings.

Step 2: Delete the Airdopes 138 earbuds from the devices’ Bluetooth list.

Step 3: Turn off Bluetooth on the desired device.

Step 4: Place the earbuds into the case and close the lid.

Step 5: Open the lid of the case and take one of the earbuds out.

Step 6: Press the multifunction touch button on said earbud three times.

Step 7: Repeat the same process with the second earbud. A red light will be on for 1 second.

This will reset the earbuds.

Step 8: Place the earbuds into the charging case and close its lid.

Step 9: Turn on Bluetooth on the desired device.

Step 10: Search for a new device.

Step 11: Open the lid of the charging case. After that, the earbuds will turn on automatically and pair with each other.

Step 12: Select the Airdopes 138 earbuds. If a password is needed, type “0000” or “1234”.

After that, the pairing will be done.

How To Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is place them into the charging case and close its lid. The earbuds will start charging automatically.

Charging Case

To charge the charging case, all you have to do is connect the case to a USB charger or charging port. It will start charging automatically.

What Do The Lights Mean?

Earbuds

• A blue light flashing: The earbuds turn on.
• A white light on while on the charging case: The earbuds are charging.
• No light on while on the charging case: The earbuds are fully charged.
• A red light on for 1 second while resetting: The earbuds are resetting.

Charging Case

• One light flashing while charging: The case has between 0% and 33% of battery.
• Two lights flashing while charging: The case has between 33% and 66% of battery.
• Three lights flashing while charging: The case has between 66% and 99% of battery.
• All lights on while charging: The case is fully charged.

Do These Earbuds Have An App?

Sadly, these earbuds don’t come with a specialized app or app support.

Some Common Problems & Troubleshooting

Left/Right/One side of the earbuds has stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range.

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left/Right/One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbuds, so try replacing them or getting a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> Select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earbuds from the above boAt Airdopes 138 manual! Want to know anything about the earphones? Do not hesitate to ask in the comments section.