Razer Hammerhead True Wireless Pro | Step-by-step Guide

The Razer Hammerhead True Wireless Pro earbuds come with a 10mm driver, app support, SBC and AAC codec support, ANC feature, Bluetooth 5.1, and more. Learn how to use these earbuds using this manual!

Razer Hammerhead True Wireless Pro | What You Need To Know!

To iOS and Android phones

Step 1: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

If the earbuds don’t go into pairing mode automatically, then Press and hold the multifunction touch button on both earbuds for about 4 seconds.

Step 2: Turn on Bluetooth on the desired device.

Step 3: Go to the device’s Bluetooth settings.

Step 4: Select the “Razer Hammerhead TWS Pro”. If a password is needed, type “0000”. After that, an audio prompt will be heard, and the pairing will be done.

To PC (Windows)

Step 1: Turn on Bluetooth on the desired device.

Step 2: Go to the settings.

Step 3: Go to “Bluetooth and other devices”.

Step 4: Click on “Add device”.

Step 5: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

If the earbuds don’t go into pairing mode automatically, then Press and hold the multifunction touch button on both earbuds for about 4 seconds.

Step 6: Select the “Razer Hammerhead TWS Pro”. If a password is needed, type “0000”. After that, an audio prompt will be heard, and the pairing will be done.

How to Wear?

Step 1: Take both earbuds out of the charging case.

Step 2: Identify the left and right earbuds.

Step 3: Choose the ear tips that best suit your ears.

Step 4: Insert the headphones into the inner canal of the ears.

Step 5: Rotate for the best possible comfort and best fit, and make sure that the microphone is pointing to the mouth.

How to Turn On and Off?

Turn on: Open the lid of the charging case. After that, the earbuds will turn on automatically. Also, you can press and hold the multifunction touch button on both earbuds for about 2 seconds.

Turn off: Place the earbuds into the charging case and close its lid. After that, the earbuds will turn off automatically.

How to Control? / How to Operate? – Instructions

• Play or pause music: Press the multifunction touch button on any of the earbuds one time.
• Play the next song: Press the multifunction touch button on any of the earbuds two times.
• Play the previous song: Press the multifunction touch button on any of the earbuds three times.
• Answer an incoming call: Press the multifunction touch button on any of the earbuds one time.
• End a current call: Press the multifunction touch button on any of the earbuds two times.
• Reject an incoming call: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.
• Answer an incoming call while on a current call: Press the multifunction touch button on any of the earbuds two times.
• Switch between two active calls: Press the multifunction touch button on any of the earbuds two times.
• Activate the voice assistant: Press and hold the multifunction touch button on any of the earbuds for about 2 seconds.

How to Activate The Gaming Mode?

To activate or deactivate the gaming mode in these earbuds, all you have to do is to press the multifunction touch button on any of the earbuds three times, and then press and hold for at least 2 seconds.

How to Activate The ANC and Quick Attention Mode?

To activate, deactivate, and change between the ANC and quick attention modes in these earbuds, all you have to do is to press and hold the multifunction touch button on any of the earbuds for at least 2 seconds.

How to Activate The Mono Mode?

To activate or deactivate the mono mode in these earbuds, all you have to do is to pair the earbuds to the device and take out one of the earbuds from the charging case. It will start working by itself.

How to Charge The Earbuds?

Earbuds

To charge the earbuds, all you have to do is to place them into the charging case and close the lid. The earbuds will start charging automatically.

Charging case

To charge the charging case, all you have to do is to connect the case to a USB charger or charging port with the included USB-A to C cable. It will start charging automatically.

What Do The Lights Mean?

Charging case

• A red light on while charging: The case is charging.
• A green light on while charging: The case is fully charged.
• A green light on: The case has a full battery.
• An orange light on: The case has a low battery.
• A red light flashing: The case has a really low battery.

How to Reset The Earbuds?

Step 1: Delete all “Razer Hammerhead TWS Pro” pairing information from the connected device.

Step 2: Place the earbuds into the charging case and keep the lid open.

Step 3: Press the multifunction touch button on both earbuds three times.

Step 4: Press and hold the multifunction touch button on both earbuds for 2 seconds. After that, resetting will be done.

A Guide To The Razer Hammerhead True Wireless Pro APP

The Razer Hammerhead True Wireless Pro earbuds have an application specially made for them, and it is the Razer Audio app, which is available on Play Store and App Store.

Just after connecting to the application with the earbuds, the battery percentage of these will appear at the top. Also, just below, there are the different options of the application itself, where you have the Equalizer, the power to activate and deactivate the ANC, configure the controls of the earbuds, and activate and deactivate the Quick Connect and sound effects.

Some Common Problems & Troubleshooting

Left / Right / One side of the earbuds have stopped working

If this happens, it may be because it is low on battery or it did not connect correctly with the device. To fix this, you can do the following:

1. Try charging the earbud that is not working or both, placing them in the charging case.

2. Try factory resetting the earbuds.

3. Check if the earbuds are operating within a normal working range

If that doesn’t work, the earbud is probably faulty, and I can go for a refund or replacement of it.

Left / Right / One side of the earbuds has a low volume

If this happens, it may be because the earbuds are dirty or the volume is set low. To fix this, you can do the following:

1. Try cleaning the earbud using a cotton swab or carefully clean the mesh with a pin.

2. Try factory resetting the earbuds.

The microphone is not working

If this happens, it can be because the microphone is muted, or the earbuds are badly positioned. To fix this, you can do the following:

If the microphone is muted, check the device microphone volume. If that doesn’t work, that means that there might be a defect in the earbud, so try replacing them or get a refund.

The earbuds are not connecting to Windows/laptop/PC

If the earbuds are earbuds not connecting, it can be because the Bluetooth on the computer has a pairing problem. To fix this, you can do the following:

1. Try disabling Bluetooth from nearby devices >>> then activate the pairing mode of the earbuds, pair and connect earbuds from Settings >>> Bluetooth & other devices >>> Add a new device >>>> select Bluetooth.

2. Try uninstalling and reinstalling the Bluetooth driver, or updating the Bluetooth driver. All can be done in Manage >>> Device Manager, reset earbuds (if available), and then repeat the step.

3. Try resetting the earbuds.

FAQs

We hope you now know how to operate the earphone from the above Razer Hammerhead True Wireless Pro manual. Want to know anything about the earphones? Do not hesitate to ask in the comments section.